1. Total number of sites: ≥26, including reagent sites ≥17, and washing stations ≥4. ≥1 oven site, ≥4 loading/unloading sites.

2. The washing site can be flexibly set up as a reagent station according to the needs. Loading and unloading sites can be flexibly allocated. The total number of loading/unloading sites is ≥4, loading sites can be up to ≥3, and unloading sites can be up to ≥3.

3. Loading capacity: reagent capacity 480±20ml, slide rack with a maximum capacity of 30 pieces.

4. Reagent cylinder: metal material, durable, with a scale line to facilitate the observation of the liquid level.

5. Colouring machine structure: fully open single-layer design, convenient to observe the liquid level height of the reagent cylinder and replace the reagent. The protective cover is supported by cylinders, which is stable and reliable.

6. The design concept of the washing station is based on the theory of fluid mechanics. It can be washed clean and the water flow can be adjusted.

7. Oven: The residual liquid on the slide can be automatically baked, eliminating the tedious steps of manual drying and natural drying. The oven temperature can be adjusted to 70°C, the temperature control accuracy is ±1℃, and the temperature can be calibrated.

8. Reagent insulation: The four reagent sites have the function of heating and insulation. The temperature is adjustable to 60℃, the temperature control accuracy is ±1℃, and the temperature can be calibrated.

9. The servo integrated system is adopted for the movement of the robotic arm. The positioning is accurate, the operation is stable, and the positioning accuracy is less than 0.1mm.

10. Protection mechanism: After the protective cover is opened, the robotic arm has the protection function of automatically stopping operation to prevent staff injury. When the robotic arm has abnormal resistance, it will automatically pause, and the touch screen interface will prompt relevant error information. The instrument does not need to cut off the power and handle the fault information according to the corresponding prompt.

11. Human-computer interaction: ≥10.4-inch industrial touch screen, all-Chinese operating system, convenient and fast setting parameters, beautiful interface. Configure 2 USB interfaces, which can connect USB discs, mice, keyboards and other peripherals to interact with the industrial computer for data. Configure 2 network interfaces, which can be used for network communication or online with the sealing machine.

12. Alarm system: Chinese voice alarm, three colour prompts of panel indicator light RGB and text indication alarm in the main interface alarm instruction bar, three alarm synchronisation prompts. The operator can process the corresponding alarm information according to the alarm prompt of the instrument.

13. Liquid level detection: The liquid level detection of the water tank can prevent accidents caused by the dry burning of the heating rod due to the low liquid level of the water tank. The liquid level detection of the sink can prevent safety accidents caused by the blockage of the drainage part and the inability to drain out.

14. Exhaust system: The instrument is equipped with an exhaust fan device, which can discharge the volatile gas in the instrument.

15. Concentration monitoring: The air quality sensor is installed in the instrument, which can monitor the air quality in the instrument. The instrument can automatically turn on or off the exhaust fan according to the air quality situation to realise the closed-loop control of air quality in the instrument.

16. Purification device: loaded with activated carbon purification device, harmful gases are discharged after being filtered by activated carbon, which is healthy and environmentally friendly.

17. Slide rack detection: the status of each loading/unloading site slide rack can be detected in real time.

18. Storage capacity: 6 layers, 20 pieces per layer, a total of 120 pieces.

19. Number of caps slides uploaded at a time: ≥160 pieces.

20. Slide specifications: slide size 26*75mm, cover slide size 24*(50±10)mm.

21. The structure of the sealing machine: fully open design, which is convenient for real-time observation of the operation of the instrument.

22. Sealing method: intelligent tilt angle cover to prevent the generation of bubbles when sealing.

23. Self-examination of broken slides: use a precision detection sensor to self-test the broken cover slides and automatically process the debris.

24. Sealing system: pressure dispensing system, which can adjust the pressure according to the viscosity of the glue and stabilise the dispensing.

25. Slide transport method: pneumatic finger clip or release the slide to realise the transfer of the slide, safe and reliable.

26. Slide output mode: The sealed slide is directly transported to 20 general specifications of the slide board, so that the film can be read directly without manual transhipment, saving manpower and improving the work efficiency of the department.

27. Cover slide allowance reminder: When the cover slide balance in the cover slide box is insufficient, remind the function staff to increase the cover slide.

28. Seal status display: The status of each layer has three status displays: completed, in progress and pending. Each seal information currently in progress can be viewed in real time.

29. Electrical parameters: rated voltage: AC220V, rated frequency: 50HZ, rated power consumption: 500W.

About us

Customer services

Contact